What rigs are you guys running?

[TSanders]

My goodness... that thing must be hellaLOUD!

I will put out an enormous ammount of sound. Takes most of what the 300 watt all tube SVT-2 Pro can throw at it.

 

[Basspro]

Cabs above the 100db range seem to love the power pushed too them, and still
remain nice and clear.

 

[Freddels]

Right now I really digging my Epifani UL502 with the Epi PS112 (soon to add another PS112). I love the tone I'm getting with this rig.

 

[alex t]

Nice gear all over you guys have!
this is my setup, the skb has changed for road ready since pics has taken and using pedal tuner not the rack.

 

[Busterkilrain]

Nice gear all over you guys have!
this is my setup, the skb has changed for road ready since pics has taken and using pedal tuner not the rack.

Well your setup certainly isn't anything to sneeze at! Holy frejoles!,
Brent

 

[Freddels]

Looks like the Epi UL 502 might be going back. The master volume pot is quite scratchy and I don't think an amp that costs this much should have any issues. I'm thinking of picking up a MB CMD 121P.

 

[Caca de Kick]

this is my setup, the skb has changed for road ready since pics has taken and using pedal tuner not the rack.

Really cool rig there, man!

 

[Sting]

Currently sporting a Bass Floor POD as a preamp into a Behringer EP1500 power amp into a SWR Goliath III. Got myself into a band several years ago where I needed power on the cheap. Bought the cab used cheap, and of course the Behringer is just plain cheap, but it sounds decent and gets me loud enough.

Looking at upgrading sometime next year. Looking at going with either Mark Bass or Genz Benz, a couple 2x10s and a good lightweight head should do just nicely...

 

[alex t]

Really cool rig there, man!

Thanks! yes I like it much, last week I went for an audition for a classic rock/metal cover band and my 2x10 cab covered all.

 

[eastcoasteddie]

don't have one pic of the entire thing, so you'll get it in dribs & drabs....not like there's a lot to it anyway.

My rack top to bottom:
Furman thingy without lights, M8X I think it is. Cost me $40
Sabine 1601 Rack tuner I bought in 1993
Amped SVT2-Pro, bought in Oct '06, one of the last USA made units...

Amp with my old rack case (where the tuner didn't fit) and my Goliath II. Picked this baby up on Craig's list for $70. Had all 4 speakers blown so I replaced them with Eminence Legend BP102-4's, to make it a 4-ohm cab being that my amp can run 4 or 2 ohms total. According to specs, the speakers are very inefficient (92dB) and supposedly lack midrange. But to the human ear they sound phenominal. Mucho low end (almost like a 1x15) with a very warm vintage tone. And who cares about inefficiency...I got TUBES, bitch!

and finally my sphincter relaxer. I think these Carvin cabs are seriously underrated. This thing rattles everything in the house.

 

[Thornton Davis]

Although my first listing in this thread is back on page 3, i've since changed from a 810 cab to two 410's. Life is a lot easier now that I can move them by myself without any assistance.

Here's the latest incarnation of my current rig.

My next photo of it will have a couple of my Stingray 5's in it. Stay tuned.

TD.

 

[ivbenaplayin]

Dear Mr. Davis, what does that baby pull on the richter scale!!? Yikes!

 

[alex t]

Although my first listing in this thread is back on page 3, i've since changed from a 810 cab to two 410's. Life is a lot easier now that I can move them by myself without any assistance.

Here's the latest incarnation of my current rig.

My next photo of it will have a couple of my Stingray 5's in it. Stay tuned.

TD.

Very nice rig!! I liked the first one to on page three , but this one goes further! nice one!
(btw, on that page three pic left button is it a tobacco burst SR5 with tortoise shell pg rsewood fboard?) looks very cool, absolute GAS!

 

[Thornton Davis]

Very nice rig!! I liked the first one to on page three , but this one goes further! nice one!
(btw, on that page three pic left button is it a tobacco burst SR5 with tortoise shell pg rsewood fboard?) looks very cool, absolute GAS!

Thx alex. To answer your question, my SR5 in that photo is Vintage Sunburst with matching headstock, Rosewood fretboard and Tortoise shell pickguard. I've since replaced the black knobs with chrome ones.

I'd love to say it's my favourite EBMM bass, but they're all so frigin' amazing that I can't pick a favourite. Although lately my Sterling 5 HH 2008 LE has had my ear and seen a lot of studio time. Can't weight to get a Big Al 5 next spring.

TD

 

[alex t]

Thnks Thornton for the answr! so my GAS on a vintage sunburst SR5, ones again looks awesome on that pic!

 

[coastie72]

Don't under estimate what you see. Amazing, truly amazing!!!!!
Genz Benz ShuttleMax 12.0 & 212T Neox

 

[Sting]

Can't weight to get a Big Al 5 next spring.
TD

Big Al 5? Is that official or wishful thinking? If there is really going to be a Big Al 5 the G.A.S. is going to be unbearable!!

 

[mynan]

Big Al 5? Is that official or wishful thinking? If there is really going to be a Big Al 5 the G.A.S. is going to be unbearable!!

According to BP, it should debut at winter NAMM.

 

[Busterkilrain]

Although my first listing in this thread is back on page 3, i've since changed from a 810 cab to two 410's. Life is a lot easier now that I can move them by myself without any assistance.

Here's the latest incarnation of my current rig.

My next photo of it will have a couple of my Stingray 5's in it. Stay tuned.

TD.

Man that's a nice looking rig! I had a chance to try out some Genz stuff in Montreal a while ago. Really nice sounding.
Brent

 

[Sting]

According to BP, it should debut at winter NAMM.

<shock><awe><speechless></shock></awe></speechless>

Now if only I can convince the wife that I NEED a Big Al 5...