Latest activity
-
tbonesullivan replied to the thread I wish EBMM guitars didn't use a built-in preamp....I am... also not a fan of preamps in guitars. Almost all effects pedals and such are designed to work with passive circuitry. There are... -
MarkF786 posted the thread I wish EBMM guitars didn't use a built-in preamp... in Ernie Ball Music Man Guitars.I love EBMM guitars & basses in most ways - I have about 10 guitars and 3 basses - but I am NOT a fan of the bulit-in preamp (except... -
baske replied to the thread Cobalt strings on my SR5?.I have put them on my 4 and 5 string EBMM. They sound so good. And I cut the strings without a bow of 90 degrees -
baske replied to the thread A Somewhat Extended Tale of Exuberation and Disappointment with the new Cobalt 5-String Bass Sets.Never bow 90 degrees before cutting the string! I have put them on my 5 string. And have no problem at all…
-
The compensated nut won't work because it's back to front dimension is too big and also it's designed for a different position relative...
-
I can’t imagine hating the case so much that I’d avoid the guitars. Personally my cases are in storage and I use gig bags for gigging. -
They were able to provide me with a little info: Neck: 7.59 KΩ Bridge: 7.64 KΩ I will also say that these are on the brighter, more... -
DrKev replied to the thread Trying different nut sizes.The compensated nut won't work because it's back to front dimension is too big and also it's designed for a different position relative... -
Aafhmsa replied to the thread Some specs needed on 2025 Sterling Luke.Hey everyone! Just wanted to chime in on the discussion about the 2025 Sterling Luke specs. It's awesome to see so many fans eager for...
-
MMeanMean replied to the thread Question Strap question for Majesty owners..I tried some rubber strap blocks, similar to the EB Strap Blocks, but a different brand. They have a high friction interface between the...
-
I have everything from Jumbo Wide (on the JPX) to Low Wide on the L3's. I personally don't find any to be a deal breaker. -
Hey everyone! Quick question. If I have a SMMS5 with a nut width of 1.77”, can I buy one of those MMS5 compensated nuts, from the MM... -
I think EBMM will sell you stock pickups, hardware, etc, but only for actual EBMM instruments, not SBMM, and you have to provide the...
-
NGD! Cutlass HSS buttercream I got off Reverb. Mint condition but was dirty and in need of strings and a setup. Sounds and plays...
-
Golem replied to the thread Need help finding Bass Pickups.IIRC parts sales are identical replacements only. You need to turn in the failed component to buy an identical new part. SBMM parts...
